Safety precautions for the use of medical beds
Release time:
2021-09-09
Purpose Before using the electric medical bed, first check whether the power cord is plugged in. Whether the controller cable is reliable.The linear drive power supply and power cord of the controller must be rotated between the elevator and the upper and lower bed frames.
1. Purpose Before using the electric medical bed, first check whether the power cord is plugged in. Whether the controller cable is reliable.
2. The linear drive power supply and power cord of the controller must be rotated between the elevator and the upper and lower bed frames. The light is on and the power is cut off, causing personal equipment accidents.
3. After the backplane is raised, the patient lies on the panel in an inaccurate state.
4. People are not allowed to jump while standing on the edge of the bed. People are not allowed to stand up while sitting on a bench to get up.
5. After the universal wheel is braked, it is not allowed to push or move, only brake to prevent movement.
6. The horizontal direction is not allowed, and the expansion guardrail is damaged.
7. Uneven walking, damage to the universal wheel of the crutches electric medical bed.
8. When using the controller, the control panel creeps and does not move alone. If you press more than two electric medical beds at the same time, the birth safety action will endanger the patient.
9. When the electric medical bed needs to be moved, the power plug must be unplugged, and the power controller must be wound before it can be pushed.
10. When the electric medical bed needs to be moved, the limit loss of the playground should be increased, and the sick patient will suffer from falling during the movement. , And endanger the health of patients.
Next page
Latest News
Do you know the precautions for maintenance of electric nursing bed?
When not in use, put the multi-functional electric medical bed at a lower position, wrap the power cord and controller wire, push it to a safe place, and brake the universal wheel.Conduct regular inspection to check whether the controller wire and each linear driver wire and plug are firm and reliable, and whether the connecting bolt is loose.
09
2021
/
09
Safety precautions for the use of medical beds
Purpose Before using the electric medical bed, first check whether the power cord is plugged in. Whether the controller cable is reliable.The linear drive power supply and power cord of the controller must be rotated between the elevator and the upper and lower bed frames.
09
2021
/
09
Detailed explanation of the assembly steps of the multifunctional nursing bed
Install the legs of the bed: the two longer ones are the legs of the bed. First, remove the screws on the legs of the bed, clip the legs of the bed to the bed board, and then re-fix the screws. The nuts used in this product are all lock nuts, so you don't need to tighten them too tightly. The two shorter beams are beams, which are respectively fixed on the installed leg of the bed, and gently shake the leg of the bed to ensure that there is no looseness.
09
2021
/
09
Is it better to be electric or hand-cranked for medical nursing beds?
According to the general classification of medical nursing beds, medical nursing beds can be divided into medical manual nursing beds and medical electric nursing beds. No matter which kind of nursing bed, the purpose is to make it more convenient for nursing staff to take care of patients and make patients as comfortable as possible. Improve your mood in the environment and help your health.
09
2021
/
09